# ZigBee monitoring (via Control4™)

## Domotz ZigBee Integration

Domotz now allows you to view which Control4™/ZigBee devices are connected to your network via the Control4™ Main Controller. Alerts are not yet supported but are planned for future releases.

Zigbee Device List in Home Controller

1. The Zigbee interface is titled "Zigbee" and shows a home controller with ID "home-controller-h6250-000FFF1707A7."
2. The channel number being used is 13.
3. Two devices are displayed:
   - The first device is labeled "c4:axxess:RCS-C4ZB-11" with a description "Router." It has been connected for 3 years.
   - The second device is labeled "c4:NyceControl:NCZ-3041" and has also been connected for 3 years.

Diagnostics panel of a device.

1. Device identifier is c4:axxess:RCS-C4ZB-11 and it is currently online.
2. Firmware version is 01.01.03.
3. LID is 0x000d6f00010d5a74 and SID is 0x6587.
4. The last contact was 3 years ago; status is ONLINE.
5. Reboots count is 58034 and boot count is 45462.
6. Node type is a router.
7. Maximum hops is set to 1 and channel is 13.
8. Outbound unicast messages are 253722 and inbound unicast messages are 446.
9. Inbound multicast messages total 116087.
10. Source route failures are 408309; many to one route failures are 0.
11. AP poll period is 600 and parent poll period is 0.
12. Pending queue count is 3; inflight queue count is 1.
13. Reflash time is 00:00:00.
14. MAC RX unicasts and APS RX unicasts are both 0.