Device Alerts

In the Alerts section of a device you can easily configure alerts for a device.

Domotz offer flexible mechanisms to configure predefined sets of alerts, for your account or for your team and systems you are integrated with.

Personal Alerts

These are alerts that will ve notified only to your account (via email or mobile push notification). Each user can have its own personal alerts.

To simplify the setup of alerts, domotz allows you to quickly assign to a device one these options:

  • No Alerts (default)
  • Standard Alerts: to assign a predefined set of alerts chat you can configure once, and assign to all the devices you want.
  • Custom Alerts: to assign a specific set of alerts to the device. Available alerts will depend on the type of devices and the services it offers.

Standard Alerts

Standard Alerts are particularly useful if you want to reuse the same set of alerts on a number of devices. In this case, you can select Standard, to have them applied to the device.

Device Alerts screenshot 1

In order to modify the predefined set of standard alerts, just click on the Edit Standard Profile button.
Please note that the Standard alerts only includes a limited choice: the types of alerts that are applicable to any IP device.

Warning: if you modify the content of the Standard profile, all devices that are using the Standard profile will be affected.

Custom Alerts

With the Custom Alerts option you can assign a specific set of alerts specific to that the device. Available alerts will depend on the type of devices and as shown in the example below.

Device Alerts screenshot 2

Shared Alerts

A Shared Alert is a predefined entity that allows you to associate a selected number of events (either network or device events) to your favourite channel. A contact channel can be, a PSA or ticketing system, a webhook, an integrated system or just a set of emails. Please refer to Shared Alerts and Ticketing Systems‍ to see how to create a Shared Alert.

Once created and available to you, a Shared Alert can be easily assigned to a device. Just click on the “Select a Shared Alert” button and choose between the Shared Alerts available, like in the example below.

Device Alerts screenshot 3

Types of Device Alerts

A device Alert is triggered by an event of connectivity of the device and generates a notification.

Hera a list of events available in Domotz:

DOWN

Triggered as soon as the device has been down for Custom Offline thresholds (default is 2 minutes, which is 4 consecutive heartbeats lost).

UP

Triggered as soon as the device is back online.

HB LOST

Triggered as soon as the device loses an IP heartbeat (a heartbeat check consists of 5 “pings” sent every 30 seconds.

IP Change

Triggered if a device changes its IP address.

Connection Performance / Ping RTD

You can ask the system to trigger if there is a connection performance issue.

The Domotz agents periodically sends packet to all devices in the network and keep track of Response Time Delay and packet loss (more details in Device management Overview ).

You can configure:

  • A median latency limit (event is triggered if RTD goes above that limit).
  • A packet loss % limit (event is triggered if the Packet loss % goes above that limit).

TCP Services events

Triggered if a TCP service of a device goes up or Down.

Please refer to SNMP and TCP services Monitoring for more details.

SNMP Sensors events

Triggered if the value of an SNMP sensor that you have configured meet certain conditions.

Please refer to SNMP and TCP services Monitoring for more details on how to configure SNMP Sensors and related alerts.

Updated on January 8, 2021

Was this article helpful?