Monitoring & Management

< 1 minuteEasy configuration management support for ProCurve, ProVision, CX Switches or HP Access Points based on HP Aruba OS.

This guide is for setting up network configuration management (backup/restore on WatchGuard) HTTPS (TCP port 8080) is needed for the recognition. SSH (TCP port 4118). TFTP (UDP port 69), a firewall rule must allow TFTP traffic from the Domotz agent host to the...

How to enable configuration management (backup/restore) on Fortigate Ensure SSH is enabled, and that no login or message banners are configured (refer to the instructions below to disable banners). TFTP should be enabled and allowed at the firewall on both, the...

Network Configuration Management (backup/restore) on Luxul devices. SSH and SNMP should be enabled. Domotz need the usage of an admin account with privilege level 15 for this functionality Please note that to allow the restore capability the TFTP server should be...

Cisco IOS – how to enable configuration management (backup/restore) Follow the steps below to enable configuration management on Cisco IOS: 1) SSH server should be enabled2) SNMP should be enabled3) SCP should be enabled4) You need to create a privilege level 15 user...

Access the web interface of the switch. In the menu bar, select SNMP. Select 'Communities' in the SNMP submenu and click Add to create a new SNMP community. Then in the pop-window that appears, please select All in the 'SNMP Management Station' section, type...

Domotz, by default, scans the following ports on every device, in order to provide a list of open ports available on each device. TCP Ports 21 (FTP)22 (SSH)23 (TELNET)25 (SMTP)53 (DNS)79 (FINGER)80 (HTTP)110 (POP3)135 (VMI)139 (Netbios)143 (IMAP and IMAP StartTLS)179...

Table of ContentsIntroductionGeneral InformationNetwork System UptimeSystem UptimeMemory InfoServers and Servers Controller BoardsDell iDRACGeneral MonitoringComponents Status MonitoringHP-ILOGeneral DocumentationMemoryLogical Hard DrivesPhysical Hard...

5 minAbout our Custom Scripts. Create scripts that can be used on IP-connected devices to retrieve additional data and execute actions on devices.

4 minCreate your own custom Monitoring Dashboards and include them in Monitoring Table with the devices information you choose.

6 minThe OS Monitoring Feature extracts additional information about devices like OS name, version, vendor, architecture, serial number and build.

< 1 minuteDomotz network monitoring software provides monitoring for TCP services. Add a TCP service and rely on the Domotz agent to start monitoring.