Monitoring & Management

Introduction Domotz is able to scan and monitor automatically all the networks attached to the operating system it is running on. For this reason to scan and monitor VLANs, you might configure a virtual network interface for each VLAN on your Linux operating system...

Prerequisites Before proceeding please check that the Domotz Box is plugged in on to a trunk port of your switch which is able to see all your VLANs. Domotz Box Configuration Connect directly to the HTTP service running on port 3000 (http://domotzboxipaddress:3000 ---...

2 min Group device interfaces for devices with two network interface cards. Monitor a device status based on all its interfaces.

Purpose This kb article, explains how to configure WinRM to unlock Domotz os monitoring feature on all your windows endpoints from the AD: in a few words, how to launch the enable_winrm_os_monitoring.ps1 script on all your windows endpoint using an Immediate Task....

2 min Creating custom driver table variables on Domotz. Custom Driver Tables enable you to extract structured data that is well-organized and easy to understand.

Following on how to enable configuration management (backup/restore) SSH should be enabled (to do that please see here) SNMP should be enabled (to do that please see here) TFTP should be enabled (should be enabled by default) In the Access Management section you need...

Domotz has developed a specialized set of features for Sony Bravia/Android 10 TV. Table of ContentsConfiguring the Domotz Sony Bravia/Android TVEnabling authenticationCreating the Pre-Shared keyPower on/off the deviceUnlock the Sony Bravia/Android TV in DomotzThe Sony...

5 min Shared Alert Events for Network Monitoring explained. Heartbeat lost, SNMP events, TCP events, configuration changes and more.

2 min Create a custom SNMP alert for SNMP sensors. This articles tells you how to get started with creating your own alerts for SNMP sensors.

To create Custom TCP sensors, go to the ‘Alert’ tab of your device.Then select the Personal Alerts section and then click the ‘Custom’ radio button. After that at the bottom of the page in the section called ‘TCP Services‘: If the service you want to monitor is not in...

To enable SNMP with default SNMP community strings on Cisco Small Business Switch (SG200, SG250, SG300, SG350, etc.), please perform the following commands: enableconfigure terminalsnmp-server serversnmp-server community public ro view DefaultSupersnmp-server...

< 1 minute NETGEAR network configuration management. How to se-up network configuration management on NETGEAR products and devices.