Monitoring & Management

SSH and SCP should be enabled. User must be super-admin or capable of restoring configuration.

Cisco SG Series – how to enable configuration management (backup/restore) SSH and SNMP should be enabled Domotz need the usage of an admin account with privilege level 15 for this functionality Add the following lines in the configuration file: ip ssh password-auth...

This guide will help you to configure your SonicWall appliance in order to get Domotz to retrieve and backup its configuration file. SonicOS 7.x 1. Please access the 'Device' section and then click on the 'Audit/SonicOS' API tab: 2. In the 'Audit/SonicOS API' tab,...

< 1 minute Easy configuration management support for ProCurve, ProVision, CX Switches or HP Access Points based on HP Aruba OS.

This guide is for setting up network configuration management (backup/restore on WatchGuard) HTTPS (TCP port 8080) is needed for the recognition. SSH (TCP port 4118). TFTP (UDP port 69), a firewall rule must allow TFTP traffic from the Domotz agent host to the...

How to enable configuration management (backup/restore) on Fortigate SSH and TFTP should be enabled. SSH account provided for unlocking must be super_admin or admin The maximum limit for the configuration file is 5MB Hash for passwords and other...

Network Configuration Management (backup/restore) on Luxul devices. SSH and SNMP should be enabled. Domotz need the usage of an admin account with privilege level 15 for this functionality Please note that to allow the restore capability the TFTP server should be...

Cisco IOS – how to enable configuration management (backup/restore) Follow the steps below to enable configuration management on Cisco IOS: 1) SSH server should be enabled2) SNMP should be enabled3) SCP should be enabled4) You need to create a privilege level 15 user...

Access the web interface of the switch. In the menu bar, select SNMP. Select 'Communities' in the SNMP submenu and click Add to create a new SNMP community. Then in the pop-window that appears, please select All in the 'SNMP Management Station' section, type...

Domotz, by default, scans the following ports on every device, in order to provide a list of open ports available on each device. Tcp Ports 21 (FTP)22 (SSH)23 (TELNET)25 (SMTP)53 (DNS)79 (FINGER)80 (HTTP)110 (POP3)135 (VMI)139 (Netbios)143 (IMAP and IMAP StartTLS)179...

Table of Contents Introduction General Information Network System Uptime System Uptime Memory Info Servers and Servers Controller Boards Dell iDRAC- General Monitoring- Components Status Monitoring HP-iLO- General Documentation- Memory- Logical Hard Drives- Physical...

5 min About our Custom Scripts. Create scripts that can be used on IP-connected devices to retrieve additional data and execute actions on devices.