Monitoring & Management

2 min Create a custom SNMP alert for SNMP sensors. This articles tells you how to get started with creating your own alerts for SNMP sensors.

To create Custom TCP sensors, go to the ‘Alert’ tab of your device.Then select the Personal Alerts section and then click the ‘Custom’ radio button. After that at the bottom of the page in the section called ‘TCP Services‘: If the service you want to monitor is not in...

To enable SNMP with default SNMP community strings on Cisco Small Business Switch (SG200, SG250, SG300, SG350, etc.), please perform the following commands: enableconfigure terminalsnmp-server serversnmp-server community public ro view DefaultSupersnmp-server...

< 1 minute NETGEAR network configuration management. How to se-up network configuration management on NETGEAR products and devices.

Connect to the NetGear switch web server and proceed as explained in the following screenshot: 1) Click on System2) Click on SNMP3) Click on Community Configuration4) Add/Modify the SNMP community strings In case you would like to configure SNMP v3, please when on...

< 1 minute How to enable MikroTik network configuration management on Domotz for backuping configs. How to enable SNMP and SSH on MikroTik.

SSH and SCP should be enabled. User must be super-admin or capable of restoring configuration.

Cisco SG Series – how to enable configuration management (backup/restore) SSH and SNMP should be enabled Domotz need the usage of an admin account with privilege level 15 for this functionality Add the following lines in the configuration file: ip ssh password-auth...

This guide will help you to configure your SonicWall appliance in order to get Domotz to retrieve and backup its configuration file. Table of ContentsSonicOS 7.xI do not want to use the 'main' Administrator userSonicOS 6.5 SonicOS 7.x 1. Please access the 'Device'...

< 1 minute Easy configuration management support for ProCurve, ProVision, CX Switches or HP Access Points based on HP Aruba OS.

This guide is for setting up network configuration management (backup/restore on WatchGuard) HTTPS (TCP port 8080) is needed for the recognition. SSH (TCP port 4118). TFTP (UDP port 69), a firewall rule must allow TFTP traffic from the Domotz agent host to the...

How to enable configuration management (backup/restore) on Fortigate Ensure SSH is enabled, and that no login or message banners are configured (refer to the instructions below to disable banners). TFTP should be enabled and allowed at the firewall on both, the...